Often the weather factor is the cause of the lost android cellphone signal because bad weather conditions can affect signal capture on the cellphone. It’s a different story if you use an Android smartphone made by Samsung such as the latest Samsung Galaxy Signal Max, which dares to guarantee a strong signal on the newest Android phone. But if the problem completely lost signal on android phone still occurs on android phones with the most advanced features such as samsung, then there is a possibility of damage to the hardware or software. And often if the android cellphone signal doesn’t want to appear, usually if it comes from hardware damage, it’s the IC Pa that we have to watch out for.
also read:
- How to Overcome Android Phone Lost Signal After Flash
- 6 Tips for Overcoming Weak Android Cellphone Signals
Therefore, on this occasion, we TechnoEcho will try to share tips with all of us to identify the source of the problem of damage to the android cellphone that comes from the IC (Integrated Circuit). In our opinion, this is necessary for us to know for reasons other than not only to increase knowledge, damage to android phones because ic can make us not confused when coming and talking when at the service. Here we will not only provide the signs of the android cellphone signal ic are starting to break but also all the characteristics of ic damage on android phones. For more details, let’s just discuss the full review in the article below.
How to Fix Android Cellphone Signal IC
But before we start talking about how to solve a broken android signal ic, it’s good if we first know some of the factors that cause the HP signal to disappear suddenly. Knowing the cause of the lost cellphone signal is needed so that we don’t take the wrong steps in making repairs. Factors that cause sim card read but no signal among others are :
- Signal is not available in your area.
- Your HP is in Error
- Changes to Network Settings
- Inconsistent Signal
- Weather Factor
- Damage to Hardware
- Software Error
- There are Problematic Third Party Applications
- There is a signal fix by the operator
After knowing the cause of the android signal appearing above the cross, we should be able to distinguish the source of the problem on the android cellphone, the signal does not appear from software or hardware damage. Below are some of the damage to android smartphones that come from IC (Integrated Circuit) such as No Signal, the cellphone suddenly turns off when receiving a call, hangs and even turns off completely.
10 Characteristics of IC Damage on Android Phones
1. IC PA (Power Amplifier)
The characteristics of android phones that are damaged due to IC PA are:
- No signal
- Signal disappears
- Unstable signal
- The signal disappears suddenly (when the first ON appears on the signal bar it looks full but suddenly disappears completely)
- Power of sending (off when making a call)
- Power Off Receive (off when receiving a call)
- Call ended / failed call
- Waste of battery
- Totally dead if there is a short
Attention :
- IC PA type synthetic / rubber (flammable if heated)
2. IC RF (radio frequency) / IF IC
The characteristics of android phones that are damaged due to the RF IC include:
- No signal
- Weak signal
- Unstable signal
- Signal disappears suddenly (when the first ON appears on the full signal bar, it suddenly disappears completely)
- Power off sending (turns off when used for calls)
- Power off receive (turns off when receiving a call)
- Hank
- Totally dead if there is a system clock of 13mhz
3. Switch Antenna
The characteristics of android phones that are damaged due to the Antenna switch are:
- No signal
- Weak signal (shown in the weak signal bar)
- Only certain operators.
4. Crystal
The characteristics of android phones that are damaged due to crystals are:
- Android cellphone signal completely lost
- Unstable signal
- Restart on the phone
- The phone is totally dead if this component is damaged
5. TX and RX filters
The characteristics of android phones that are damaged due to TX and RX filters include:
- The sound is intermittent when it is used to communicate
- It can also cause the cellphone to have no signal, especially on the rx filter 1800
6. EEPROM ( electrically erasable programmable read only memory ) / MEMORY
The characteristics of android phones that are damaged due to EEPROM are:
- Hank menu on mobile
- Missing one of the menus on the Blink phone on the cellphone LCD screen
- Long startup on the phone Restart (auto on)
- Android cellphone cellular data not showing
- Total death due to data loss and IC damage
7. CPU (Central Processing Unit)
Characteristics of android phones that are damaged because of the CPU, for example, such as:
- Keypad not working or Hank Hank menu on phone
- Android phone screen blank white / black
- No signal
- No ringing on the phone
- Led light does not turn on
- Totally dead phone
- And almost all the damage that exists on the cellphone comes down to the CPU IC
8. Bluetooth IC
The characteristics of android phones that are damaged due to the Bluetooth IC are:
- Bluetooth errors;
- Cannot Pair with other Bluetooth Devices.
9. UI (user interface)
The characteristics of android phones that are damaged due to the IC UI include:
- The led light on the lcd is off
- The led light on the keypad is off
- Vibrate not working
- Ringer not working
10. IC CHARGING
The characteristics of android phones that are damaged by the charging IC are:
- Android phone can’t be charged/charged
- Automatic charge Recharging (reconnect charging)
- Drop the battery if there is a short charge. Charge for too long but does not charge the battery
Thus our article this time which just reviewed about the characteristics of damage to the Android cellphone ic easily. Hopefully our article this time can provide benefits for all of us, thank you so much.
Mangihin.com is a website that provides useful information, please share if there is interesting information that can help you. Thank you